Cold Work Tool Steel

1.2379

DIN 1.2379 / X153CrMoV12 Steel is a high carbon and high chromium type cold work tool steel. The Molybdenum and Vanadium compositon of din 1.2379 is more than 1.2601 steel. X153CrMoV12 steel has higher strength and toughness,which makes the comprehensive performance of 1.2379 steel better. Chemical Composition C: 1.45-1.60; Si: 0.10-0.60; Mn: 0.20-0.60; P: max0.030; S: max0.030; Cr: 11.00-13.00; Mo: 0.70-1.00; V: 0.70-1.00;

S7

S7 Tool Steel is an air-hardening or oil hardening tool steel that is characterized by its shock resistance, excellent toughness, high compression strength, and medium wear resistance. The exceptional toughness and shock-resistant qualities of this steel makes it a great option for a variety of tooling applications. S7 is a versatile tool steel and can be used for cold or hot work applications.

D3 1.2080 CR12

AISI D3 cold work steel, also know as DIN 1.2080 (Werkstoff) and JIS SKD1, is a 12% chrome alloy steel. D3 cold work steel has very high wear resistance against abrasive and adhesive wear due to the high volume of hard carbides in the steel matrix, medium toughness, dimensionally stable, high compressive strength, not secondary hardenable. Type AISI D3 cold works tool steel is oil-quenched; though small sections can be gas quenched after austenitization using vacuum. As a result, tools made with type D3 cold work tool steel tend to be brittle during hardening. Type D2 tool steel is the most commonly used steel among the group D steels. The D3 cold work steels contain 1.5 to 2.35% of carbon and 12% of chromium.

D2,1.2379,X153CrMo12

Cold Works D2 tool steel is a high carbon, high chromium tool steel (12% chrome) with extremely high wear resisting properties, heat treatable to 60-62 Rc. D2 steel is very wear resistant but not as tough as lower alloyed steels. D2 tool steel hardens in air with a low order of movement and offers a measure of corrosion resistance when polished. The high percentage of chromium gives it mild corrosion-resisting properties in the hardened condition. The mechanical properties of D2 are very sensitive to heat treatment. D2 steel is available in de-carb free rounds, flats, and squares, as well as ground flat stock and drill rod.

Cr12MoVD51.2601SKD11

We supply in Round bar, gauge plate steel, pipe / Tube,rod, square, hexagonal, blanks, plate, sheet, precision ground flat bar, precision ground bar stock and hollow bar. provide black surface and black surface alloy steel material.

1.2067/L3/Cr2

SKD-11 toolsteel is a 12% chrome steel, it has very high resistance against abrasive and adhesive wear due to a high volume of hard carbides in the steel matrix, good toughness, very good dimensional stability, high compressive strength, and has a very good base material for PVD/CVD coating as well as nitriding due to its secondary hardening properties. Similar to SKD11 SKD-11. Applications: Cutting, punching, stamping tools, shear blades, thread rolling dies, cold extrusion dies, drawing and bending tools, flanging and straightening rolls, fine cutting tools, deep drawing tools, plastic moulds for abrasive polymers.

D3 1.2080 cr12

WP7V

Cr-Mo-V-alloy special steel which can be water cooled, very good tempering resistance, pressure resistance and hot wearing capability with good toughness.

D3 1.2080 cr12

SCM435

1.2419

SKD5 1.2067

CR8

Cr8 is a kind of cold work tool steel,which content 8% Cr and above.

1.2379 D2 NC11LV

We are professional cold works D2 tool steel supplier for more than two decades. We supply AISI / ASTM A681 cold works D2 tool steels alloy steel materials in reliable quality and for attractive price for sale. We have deep knowledge of D2 tool steel’s chemical composition and properties. Contact us for any D2 tool steel materials demands.

Cr8Mo2SiV/A8/DC53

DC53 steel is a new general purpose cold work die and mold steel whose strength and toughness approach those of high-speed steels. DC53 steel, is an improvement over alloy tool steel D2 specified in Standard (JIS) G4404. It eliminates the disadvantages of insufficient hardness and toughness, resulting from high-temperature tempering found with D2, and is intended to replace D2 in use for general purpose and precision dies. DC53 steel also has excellent machining characteristics and is well suited as a substrate for PVD surface treatments. DC53 steel can also be hot process CVD and TD (Thermal Diffusion) coated, however post heat treat is generally recommended.

Cr12W,1.2436

AISI D6 tool steel is a high-carbon, 12% chromium alloy cold work tool steel with tungsten. D6 steel is an air hardening alloy tool steel with excellent resistance to wear and abrasion. As a high carbon high chromium tool steel D6 has better through hardening properties than D3 steel and dimensional stability combined with high resistance to tempering.

Hot Rolled Round Bars